Kfm4 Flying Wing Build Log 01

Something that I'm working on, a blunt-nose flying wing that will utilize the Kfm4 airfoil. I originally got a rough idea from a flying wing that I know works - the Teksumo - then I plugged values into this Flying Wing CG Calculator to give it the width of a DTF board, lesser sweep, and a blunt nose.

After that, I brought the design into Houdini, and adjusted the rear end of the wing to have the motor fitted more forward into the wing in the hopes this will help balance the CG easier. Also, I widened the rear in order to accommodate up to 8 inch props.