Friday, October 30, 2015

DIY Canard Airframe 03

Laser cutting this design tomorrow :3

After some thought, I decided to just do the whole fuselage. Alot of the material will be removed anyways, and the estimated weight is about 130g? I've added lots of structure at the points between the 3 "pods" that should be rather strong.

The DTF will then be more of a protective surface and less a structural thing. Which is good, as I really have my doubts of the longevity of the fuselage once holes are cut for equipment.

Securing the battery down is another story that I'll think about later :)

No comments: